bathroom-projects-11

Want to install some accessories in your bathroom but you’re too afraid of drilling into your tiles? Fear no more – Selleys Hold Up is here!

Follow this step by step guide to installing bathroom accessories like a pro.

Beginner Intermediate Advanced
1 hour

What You Need

  • Selleys Hold Up 130g tube
  • Bathroom accessories (toilet roll holder, towel rack, towel ring) – ensure accessories have a flush back (not inset)
  • Spirit level

Easy as...

  1. Make sure the surfaces are clean, free from grease, grit and grime.
  2. Cut the Selleys Hold Up nozzle at the second line on a 45 angle.
  3. Apply Selleys Hold Up to the bathroom accessory you wish to install.
  4. Press the accessory firmly against the wall in place.
  5. If installing a towel rail (or similar accessory) use a spirit level to ensure your placement is level – if not, simply adjust (Selleys Hold Up is adjustable for up to 15 minutes).
  6. Immediately clean any excess adhesive with white spirits before product cures.
  7. Wait at least 48 hours until product is fully cured before adding weight (longer cure times will be needed in cold or dry conditions or where both surfaces are non-porous)

Products

Hold Up

Looking for a strong and versatile adhesive for all your DIY projects? Selleys Hold Up is the solution. This multipurpose adhesive bonds quickly and securely.

Liquid Nails Instant Hold

Looking for an instant and strong adhesive for your DIY projects? Selleys Liquid Nails Instant Hold is the solution. This multipurpose adhesive sets in just 10 seconds.


How to Guides

How To Seal a Sink

Achieve a flawless finish in your bathroom or kitchen with Selleys. Our guide will show you how to seal a sink and achieve a clean and watertight surface.

Leaking Shower Repair

Stop your shower from leaking with Selleys. Our guide will show you how to fix common shower leaks and prevent further damage.

How To Remove Old Silicone

Remove old silicone with ease using Selleys. Our guide will show you how to remove old silicone and prepare surfaces for reapplication.