How To Remove Old Silicone

What You Need

• Selleys Silicone Remover
• Methylated Spirits
• Sharp Blade
• Cloth/rag for cleaning

How to Remove Silicone – Our Process

1. Cut away the worst of the sealant using a sharp blade.
2. Ensure the surfaces are completely dry.
3. Apply Selleys Silicone Remover on the surface of the old silicone layering it about 3mm high (ensure you apply to a small area to test first). 
4. Allow 2-4 hours for thin beads of sealant to soften. Note that it can be significantly longer if the silicone is not cut back first and may require multiple applications. It is important to make sure the remover does not dry out while you wait the couple of hours for it to soften the silicone.
5. Once the remover has softened the silicone, you can clean the silicone residue up with methylated spirits – do not use water.
6. Next step is to apply new sealant to the area. Click here for the guide.

Replacing Your Silicone Sealant

Replace your silicone is 4 simple steps

1. To ensure a neat finish, use masking or painters tape to mask sides before applying sealant
2. Apply Selleys No Mould, ensuring sealant is pushed into the joint 
3. Tool sealant with a spatula dipped in detergent water within 5-10 minutes of application.
4. Remove tape as soon as possible to before product has a chance to skin.
5. Clean up any residual excess silicone with turps.