How To Update Skirting Boards

What You Need

• Selleys Liquid Nails Fast Grab
• Caulking gun
• Sharp Knife
• Skirting boards cut to size
• Selleys No More Gaps Multipurpose

Easy as..

1. Make sure the surfaces are clean, dry and free of oil, grease and dust.
2. Cut the cartridge tip, then cut the nozzle into the desired width, about 5mm.
3. Use caulking gun to apply beads of Liquid Nails Fast Grab to the top and bottom of the back of the skirting board surface.
4. Bring the surfaces together and maneuver the skirting board into the desired position.
5. The product is repositionable for 20 minutes after fitting. Tape the skirting board to hold it in place.
6. Allow 24 hours for the adhesive to set before removing any temporary fasteners, in this case the tape.
7. Fill gaps between skirting board and wall with Selleys No More Gaps Multipurpose

Handy Hints

• If the skirting board is slightly warped and doesn’t fit perfectly along the wall, put bricks up against it to hold it in position while the adhesive cures.