Selleys Fix&Go Shoe Repair

Use in a well ventilated area.

1. Ensure surfaces are clean and dry. Remove cap, carefully pierce seal.
2. Contact Method (for larger area repairs): Coat both surfaces evenly with glue. Keep apart until the adhesive film is almost dry (approximately 1 minute). Carefully line up surfaces to be joined and press firmly together. Bonds immediately on contact. Wipe nozzle with cloth, replace cap immediately after use. Clean up with acetone before it dries.
3. Wet Bond Method (for small area repairs): Apply Selleys Shoe Fix to one surface only and immediately press together. Lightly clamp or hold until dry.
4. Wipe nozzle and replace cap immediately after use. Clean up spills and excess adhesive before it sets with acetone. Ensure adhesive is completely cleaned up from exposed surfaces. 

Limitations:

• *Will not bond Polyethylene or Polypropylene plastics. May cause some vinyl & plastics to discolour or harden. If in doubt, please test in a small hidden area first.

• For very porous surfaces, seal by first coating the surface with a thin layer of adhesive and allow it to dry before applying a second coat to form the bond as directed.
• Clamping or pressing with a heavy object during drying may be used for stronger adhesion (bulldog clips are ideal for this).
• Maximum bond strength is achieved after 3 days. Practical use after 1 day.
• Acetone (nail polish remover) can be used to clean up spills and excess adhesive before it sets. 

• Uncured product may be removed with acetone or turps.
• Cured product can be sanded and scraped.