Liquid Nails Exterior
Selleys Liquid Nails Exterior is a high-performance construction adhesive specifically designed for outdoor use. It can withstand heat, water and UV.
Liquid Nails Fast Grab
Key Features
- Fast grab minimises the need to support joints while product cures.
- Strong bond - which is flexible enough to respond to building movement, allowing a strong bond to be maintained over time.
- Easily cleans up with water.
- Meets Green Building Council VOC limits for general purpose adhesives (<50g/L).
- Meets or exceeds requirements specified by Australian Standard AS 2329-1999.
- Bridges gaps, up to 9mm, on rough and ill-fitting construction material.
Liquid Nails Original
Get the original and best adhesive for your tough jobs with Selleys Liquid Nails Original. Perfect for metal, wood, and more.
Liquid Nails Heavy Duty
Get an extra strong bond for your toughest jobs with Selleys Liquid Nails Heavy Duty. Perfect for metal, wood, and more.
Liquid Nails Instant Hold
Looking for an instant and strong adhesive for your DIY projects? Selleys Liquid Nails Instant Hold is the solution. This multipurpose adhesive sets in just 10 seconds.
- Overview
- Instructions
- Specifications
Selleys Liquid Nails Fast Grab is a high strength construction adhesive that provides strong initial holding power. The water-based formulation is low odour and allows for easy water clean up.
Where can this product be used?
- Timber panelling to walls
- Skirting boards
- Styrene foam panels and blocks
- Architraves
- Particle board to masonry surfaces
- Tasks where nailing is not desirable
What materials is this product suitable for?
- MDF
- Particleboard
- Timber
- Plasterboard
- Styrene Foam
- Masonry
- Concrete
- Tiles
- Ceramics
- Metals
- Rubber
- Glass
- Most plastic* - pre test plastic to determine compatibility
- *Not for use on polyethylene, polypropylene, Teflon or silicone.
How to Use
- Ensure surfaces are dry and free from oil, grease and dust.
- Cut cartridge tip, fit nozzle and cut to desired opening (5mm) then insert into caulking gun. We recommend Selleys Light Speed Caulking Gun.
- Apply bead along length of joist, stud or batten. On broad flat surfaces apply beads every 40cm.
- Bring surfaces together as soon as possible (within the first 5 minutes). Fix with sufficient nails, screws or clamping to hold load and achieve contact over total bond area.
- Allow adhesive to set (minimum 24hours) before removing any temporary fasteners or clamping. Use with mechanical fasteners in high stress applications.
Limitations:
- Avoid use in tightly clamped joints eg. Cabinet making or joinery
- Not for use on mirrors. Use Liquid Nails® Mirror Metal & Glass
- Not for metals heated by direct sunlight or for wet areas. Use Liquid Nails® Mirror Metal & Glass
- For sheet timber flooring to flat surfaces Liquid Nails® High Strength is recommended.
- Do not use as the sole bonding agent for structural bonding.
- *Not for use on polyethylene, polypropylene, Teflon or silicone.
- Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.
Handy tips
- Faster curing is achieved when at least one surface is porous.
- Liquid Nails Fast Grab should always be used in conjuction with mechanical fasteners in structural, critical or high stress applications.
- Usually a strong bond is achieved in 24 hours and continues to strengthen over 3 days. Expect longer times for less porous surfaces and in cold weather.
- Bridges gaps up to 9mm
- Suitable for sheltered exterior applications
- Paintable after 12 hours
- Cured Liquid Nails Fast Grab residues can be removed by rubbing with Acetone. This may take a few minutes to penetrate.
- Liquid Nails Fast Grab shrinks slightly on curing.
- High humidity and low temperatures can both significantly slow the cure rate of Liquid Nails Fast Grab especially when used on non-porous surfaces.
- When applying to one surface, ensure sufficient Liquid Nails Fast is used so that some adhesive extrudes out when surfaces are brought together. Then wipe off excess if necessary. If glue is not visible, then sufficient contact may not have been made between the surfaces and a weak joint may result.
Clean Up
- Uncured product may be removed with water.
- Cured product can be removed by scraping or sanding.
Size |
95g Tube |
|
420g Cartridge |
|
Colours |
Beige |
Technology |
Water Based |
Use |
Interior |
Useful downloads
How to Guides
How To Create A Chopping Board
Keep on trend and learn how to create a stunning chopping board for serving which will be the envy of your friends at your next dinner party.
How To Fix A Splashback To A Wall
Sticking a splash back in a kitchen is a great way to improve the aesthetics of the kitchen. Selleys make the job easier with this step by step guide.
How To Makeover Your Kitchen In An Afternoon
The kitchen is the heart of every family home, but over time – cooking spills, kids, clutter can leave it looking a little tired. Here are some simple steps to giving it a refresh
How To Seal A Kitchen Splashback
Sealing your splashback is the final step to installing a splashback and perhaps the most important! It's super easy to do with Selleys silicone sealant.
Share
Share this Product with your friends