Aquadhere Quick Set

1. Surfaces to be bonded must be close fitting, dry and clean.
2. Shake bottle and apply thinly to one surface.
3. Press surfaces together firmly for 1-2 minutes.
4. Wipe off excess adhesive with a damp cloth whilst still wet
5. If joint is under stress or timber is bowed or warped, clamp until adhesive sets.
6. Adhesive strength will be sufficient for object to be handled after 5-10 minutes for softwoods and 15-20 minutes for hardwoods. Allow 30-60 minutes before working with object.
7. Maximum strength is attained in 4-8 hours. Allow longer setting/bonding time in cold or humid conditions.

        Limitations:

• Not for exterior use.
• Unsuitable for use on coated wallpaper overlaps eg vinyl
• Although Aquadhere Quick Set is reasonably water resistant, it is not recommended for use in water or weather exposed situations or for any job where maximum water resistance is required (for weather exposed and/or wet areas we recommend Selleys Aquadhere exterior or Selleys Aquadhere Durabond).
• Will not take timber stains.
• Aquadhere Quick Set is not recommended for joints that are subjected to constant high stress.
• Do not use on projects that you need to be able to sand, as Aquadhere Interior is not sandable.
• Will not bond MDF, we recommend using Selleys Aquadhere Exterior. 

• 1L covers approximately 8m2
• On average Aquadhere QuickSet develops twice the strength of standard PVA adhesives after 3 mins on softwoods such as hoop pine or 8 minutes on hardwoods such as mahogany.
• *No need for clamping where joints are not under stress and timber is not bowed, warped etc.
• For exterior applications where weatherability is needed use Aquadhere® Exterior.

• Uncured product may be removed with water.
• Cured product can sanded or scraped.