No More Cracks Doors And Trims

1. Ensure the surface to be filled is clean and dry with no loose or powdery material.
2. Use a filling blade or scraper to firmly press the filler in and scrape off excess to minimise sanding.
3. Allow to dry for 2-3 hours, depending on humidity, then sand with fine sand paper.
4. For a perfect finish apply another thin coat of filler, allow to dry before sanding lightly with fine sandpaper.

        Limitations:

• Do not use below 5°C.
• Where movement occurs, use Selleys No More Gaps.
• Not suitable for exterior timber likely to absorb excessive amounts of water.

• For applications more than 2mm deep, or in cold or humid conditions, expect longer drying times.
• Exterior surfaces should be primed before filling.
• Exterior applications should be protected from rain until painted over.
• For best results, apply an undercoat before your top coat.

• Uncured product may be removed with water.
• Cured product can be removed by sanding and scraping.