No More Cracks Exterior Wood Filler

1. Ensure that the surface to be filled is clean and dry with no loose or powdery material. Remove any rotten wood and fix split timber firmly before filling. Priming is unnecessary.
2. Use a filling blade or scraper to firmly press the filler in and scrape off excess to minimise sanding.
3. For thin applications (2-3mm) allow to dry for 2–3 hours, depending on humidity, then sand with fine sand paper.
4. For a perfect finish apply another thin coat of filler, allow to dry then sand lightly with very fine sand paper.

Limitations:

• Do not use below 5°C.
• Where movement occurs use Selleys No More Gaps Exterior & Weatherboard.
• Not for permanently wet areas or joints between weatherboards, floorboard panels etc.

• For best results if painting, apply an undercoat before your top coat.
• Protect from rain until painted over.
• When tinting or staining, final colour is not achieved until varnish is applied.

• Clean tools and hands with water before filler dries.