No More Cracks Large Cracks And Holes

1. Ensure the surface to be filled is clean and dry with no loose or powdery material.
   
2. Use a filling blade or scraper to firmly press the filler in and scrape off excess to minimise sanding.
   
3. Allow to dry for 2-3 hours, depending on humidity. For deeper jobs apply in 6mm layers allowing each layer to dry before applying the next layer.
   
4. Sand back with fine sand paper.

        Limitations:

• Do not use below 5°C.
  
• Where movement occurs use Selleys No More Gaps.
  
• Not suitable for exterior timber likely to absorb excessive amounts of water.
  

• For deeper holes fill in 6mm layers, allowing each layer to dry before applying in the next.
  
• Overfill final layer only slightly to minimise sanding.
  
• It is recommended exterior surfaces are primed before filling.
  
• Exterior applications should be protected from rain until painted over.
  
• Before painting clean surface with Selleys Sugar Soap. A clean surface aids paint adhesion.
  
• For best results apply an undercoat before your top coat of paint.

• Uncured product may be removed with water.
• Cured product can be removed by sanding and scraping.