Selleys Glass Silicone
Selleys Glass Silicone is an acetic acid curing 100% silicone, which been specially formulated for glazing and aquarium construction.
Sealant Remover
Key Features
- Save time as it works in 10 minutes
- Less effort as it breaks down the sealant for quick and easy removal
- Easy to use, as the gel consistency makes it ideal for vertical surfaces
- No residue – leaving a residue free surface that can be painted
Selleys FlameFlex
Selleys FlameFlex High Performance Sealant can be used for construction joints & gaps where a fire rated seal is specified*.
Selleys Butyl Mastic
Selleys Butyl Mastic is a synthetic resin, butyl rubber based mastic which forms a smooth tough skin, but remains permanently plastic underneath.
Roof And Gutter Silicone
Keep your roof and gutters leak-free with Selleys Roof and Gutter Silicone. This sealant provides a water-tight seal that resists cracking and shrinking.
- Overview
- Instructions
- Specifications
Selleys Sealant Remover takes the elbow grease out of removing old and unwanted sealants due to mould or cracking with a simple, single application (silicones, acrylics, SMP/hybrids or polyurethanes). Perfect for showers, baths, spas, sinks, vanities, splashbacks.
Selleys Sealant Remover takes the elbow grease out of removing old and unwanted sealant.
Best for**:
- Glass
- Anodised aluminium
- Stainless steel
- Mirror surface
- Masonry
- Most metal
- Most plastics
- Ceramic tiles
- Porcelain
- Grouts
- Perspex/acrylic
- Brass
- Concrete
- Soft vinyl
- Laminate
- Engineered stone
- Painted surfaces
- Enamelled steel
- Fibreglass
- Gel coat
**Not suitable for rubber, EPDM & polycarbonate.
Product may affect some substrates.Test for compatibility before use. Do not leave on porous substrates or acrylic-painted surfaces for extended periods.
Some silicones contain oils that may penetrate porous surfaces or metals. Product will not remove staining caused by these oils.
Where can this product be used?
- Removes sealant around shower screens
- Removes sealant around baths
- Removes sealant around spas
- Removes sealant around sinks
- Removes sealant around window frames
- Removes sealant around roofing
- Removes sealant around tiles and bricks
- Will discolour some plastics such as nylon, polypropylene, ABS and polystrene and will affect the surfaces of some metals such as lead, brass, mild steel.
- Product can damage painted surfaces and bare timber if left for extended periods.This includes powder coated and oven-baked wet paint products such as COLORBOND®.
- Pre-test surfaces before use.
Limitations:
**Not suitable for rubber, EPDM , & polycarbonate.
• Product may affect some substrates.Test for compatibility before use. Do not leave on porous substrates or acrylic-painted surfaces for extended periods.
• Some silicones contain oils that may penetrate porous surfaces or metals. Product will not remove staining caused by these oils.
How to Use
- Ensure surface is completely dry, as water contamination will render the product ineffective. For fast results firstly remove as much of the old Sealant as possible.
- Read the safety directions before using the product. Carefully unscrew lid open.
- Use a scraper to spread a 5 mm thick layer of Sealant remover evenly over the old Sealant.
- For effective removal, Leave Sealant Remover product on for at least 10 minutes. For thick deposits leave for 24 hours. In some cases, a second application may be needed.
- Use a scraper or sealant remover tool to remove the softened sealant from the surface. Selleys recommends using a sealant remover tool.
- Clean residue, remaining Sealant Remover and tools immediately with a cloth soaked in methylated spirits.
- If you are applying new sealant please refer to the Selleys range of sealants.
Limitations:
**Not suitable for rubber, EPDM & polycarbonate.
• Product may affect some substrates. Test for compatibility before use. Do not leave on porous substrates or acrylic-painted surfaces for extended periods.
• Some silicones contain oils that may penetrate porous surfaces or metals. Product will not remove staining caused by these oils.
Handy tips
- Wear protective gloves, avoid breathing vapour and use in a well-ventilated area.
- Carefully cut or scrape off the old sealant with a sharp knife or sealant remover tool to a depth of less than 5mm. For ease Selleys recommends a sealant remover tool.
- Leave Sealant Remover product on for at least 10 minutes. In some cases a second application may be required.
- Use a scraper or sealant remover tool to remove the softened sealant from the surface.
- Any residue and remaining Sealant Remover on surface should be cleaned up with mineral turpentine.
- If you are applying a new sealant, refer to the Selleys range of sealants.
Clean Up
-
Clean up with mineral turpentine
Size |
375g Tub |
Colours |
Light Beige |
Technology |
Solvent Based |
Use |
Interior Exterior |
Useful downloads
How to Guides
How To Replace Old Silicone
Update the look of your bathroom or kitchen with Selleys. Our guide will show you how to replace old silicone and achieve a clean and fresh finish.
How To Remove Old Silicone
Remove old silicone with ease using Selleys. Our guide will show you how to remove old silicone and prepare surfaces for reapplication.
Share
Share this Product with your friends